8 pictures (1 car) found: model of "Mach-1", sub-model of "Paper Car"
Group photos by car
Picture Search Results: page 1 of 1
(from page 6 of the 1974 Collection)
Here is the cardboard cut-out at full size. Print this on heavy paper or attach it to heavier paper before cutting it out. Save the image to your harddrive or click here to remove all the borders for printing. The original card was designed to snap out the car along perforations, you'll have to use a scissors. Its a little hard to tell, but the only white tab on the left and right side of the car is on the bottom (make sure you cut out the inside the the wheels next to this tab so that when the tab is folded, the wheels don't fold with it). Tab C is attached to the hood, Tab B is attached to the front window, and Tab A is connected to the rear window/hatch not the side windows. Cut along the inside of each of the tires to separate them from the bottom tab which is folded back. Also make sure you cut far enough up the side of the rear window, along the roof, to allow the rear window to fit properly. The bottom side of the front license plate also needs to be cut out. Pre-bend along each dotted line before gluing. Refer to Figure 1 shown in the top right. Glue the car together in stages, allowing the glue to dry between. We also have a 2011 Paper Mustang.
(from page 6 of the 1974 Collection)
Here is a Grabber Blue version of the paper car model to cut out. Save the image to your harddrive or click here to remove all the borders for printing. See the red car cut out for additional instructions.
(from page 6 of the 1974 Collection)
Here is a Yellow version of the paper car to cut out. Save the image to your harddrive or click here to remove all the borders for printing. See the red car cut out for additional instructions. We also have a 2011 Paper Mustang.
(from page 6 of the 1974 Collection)
I was thinking we need a Lime Green version of the paper car to cut out. Save the image to your harddrive or click here to remove all the borders for printing. See the red car cut out for additional instructions.
(from page 6 of the 1974 Collection)
Okay, I needed a whole fleet of Mustang paper cars on my desk so I created a few additional colors. This one is orange, even though this color was not offered in 1974. Save the image to your harddrive or click here to remove all the borders for printing. See the red car cut out for additional instructions.
(from page 6 of the 1974 Collection)
Here is a dark blue version of the 1974 Mach 1 paper car model. Save the image to your harddrive or click here to remove all the borders for printing. See the red car cut out for additional instructions.
(from page 6 of the 1974 Collection)
Here is a white version of the 1974 Mustang Mach 1 paper car cutout. Save the image to your harddrive or click here to remove all the borders for printing. See the red car cut out for additional instructions.
(from page 6 of the 1974 Collection)
Here are all the 1974 Mustang II Mach-1 paper cars printed out and assembled on my desk at work.
