1 car (8 pictures) found: model of "Mach-1", sub-model of "Paper Car", grouped by car
Expand to show description of each image
Picture Search Results: page 1 of 1
(8 photos of a 1974 Mach 1 Paper Car Mustang Promotional Sales Brochure) Here is the cardboard cut-out at full size. Print this on heavy paper or attach it to heavier paper before cutting it out. Save the image to your harddrive or click here to remove all the borders for printing. The original card was designed to snap out the car along perforations, you'll have to use a scissors. Its a little hard to tell, but the only white tab on the left and right side of the car is on the bottom (make sure you cut out the inside the the wheels next to this tab so that when the tab is folded, the wheels don't fold with it). Tab C is attached to the hood, Tab B is attached to the front window, and Tab A is connected to the rear window/hatch not the side windows. Cut along the inside of each of the tires to separate them from the bottom tab which is folded back. Also make sure you cut far enough up the side of the rear window, along the roof, to allow the rear window to fit properly. The bottom side of the front license plate also needs to be cut out. Pre-bend along each dotted line before gluing. Refer to Figure 1 shown in the top right. Glue the car together in stages, allowing the glue to dry between. We also have a 2011 Paper Mustang.
